Your location:Home > Product > Road marking machine

TT-FCP180Self-propelled and station-based two-component spraying marking machine

Expert assessment:


Stepless variable speed driveTwo - way self - drive constant speed can be realized within the speed of 0 ~ 4km/h,which significantly reduce labor intensity and improve operating efficiency,  it also effectively reduce the manpower input , so it is suitable for long continuous distance marking operation.

Smart operating systemlinear selection, mixing speed , mixing ratio of coating and curing agent can be automatically controlled by panel. Clients can select the spreader automatic delay clutch system which can completely solve the problem that the glass beads at the wrong position.

High - pressure non-pneumatic spraying systemTwo imported separate pump with the flow rate of 9L/min is a type of super wear - resistant plunger pump.the system features the large flow and stable pressure.The spraying pressure value can be adjusted between 0-20Mpa to satisfy different needs when it comes to depth and width of paint.The combination of the variable pump and the automatic reciprocating hydraulic cylinder in a way remove the driving electric driving control system,so that it can provide a continuous, lasting and stable driving force for the paint pump.
Glass beads spraying systemLarge - capacity pressure-type glass bead tank is equipped with efficient drying system which effectively avoid glass beads to block gun. The spraying pressure, flow and spraying width of glass beads can be adjusted in line with the construction needs, which can fully meet the spraying requirements suggested by clients.
Good performance of anti-corrosion and anti-rustThe whole machine adopts high - grade electrophoresis coating or electroplating treatment, which can effectively improve life of the equipment with anti-corrosion and anti-rust performance.
Engine machine1.3HP gas engine
Air compressor displacement(m³/min)0.38
Volume of glass beads tank(L)30
Line marking styleHigh - pressure non-pneumatic spraying system
Coating pump flow(L/min)2×9
paint pump or control modeplunger pump with the super wear-resistant and compound metal features,Automatic reciprocating cylinder driving force
Rated maximum operating pressure (Mpa) 20
spraying gun setting Two set of Pneumatic spray gun
Marking width(mm) 50/100/200/250/300
Appearance dimensions (mm) 2100×1400×1350
Selected marking line end Two - component scraping system and :Two - component casting system


Welcome to leave a message


Recommend type
Back to top
Copyright © TATU Markings All rights reserved