Your location:Home > Product > Road marking truck

WRD5184THXThermoplastic road marking truck

Expert assessment:

A variety of thermoplastic construction methods can be integratedusers can choose one or a combination of the following thermoplastic marking construction methods according to their own needs: thermoplastic air spray system (TPAS), thermoplastic screed system ( TPS), thermoplastic extrusion system (TPE).
Equipped with a fully imported hydraulic transfer systemachieve precise control of the construction speed, and freely switch between low and uniform speeds to ensure the quality of the marking. The large-capacity hydraulic oil tank equipped with a new cooling system can ensure that the hydraulic system can always maintain a relatively stable cooling value during continuous operation, and effectively improve the operating life of the hydraulic system.
Intelligent marking control systemWhile satisfying users' basic functions such as precise control and line selection input in accordance with line type standards and construction requirements, the automatic collection and analysis system of construction marking data can be added according to needs of clients. In order to do the automatic collection, calculation and printing work of construction parameters within unit time such as paint consumption, marking length, construction area, etc., as well as automatic evaluation, warning and printing of construction quality (eg:thickness prompts) and real-time positioning;
Automatic temperature control fuel heating systemIndirect heating by heat transfer oil, diesel heating system and automatic temperature control system are used to ensure that the paint in the tank can be melted quickly and at a constant temperature according to the set temperature value, and will not be overheated due to insufficient heating when mixing or mixing unevenly, it will affect the internal quality of the paint; the structure of the conveying system is reasonable, the resistance of the conveying pipe is small, the residue is small, and the patency is good. The patented feeding system can not only fully guarantee the paint supply during the marking construction at the marking end, but also can easily, quickly and thoroughly clean the feeding channel after construction. The entire feeding system saves materials, time, labor, durability, and convenient maintenance.
Total weight14500kg
Engine ModelMC07.35-60
Engine Power248KW
Tyre Model10.00R20 18PR
Volume of Tank1200L
Volume of Glass Beads2x500
Heating MethodThermal oil furnace
Insulation MethodThermal oil multilayer insulation
Type of MarkingThermoplastic spraying,extrusion,vibration
Line Width(mm)50-450
Line Depth(mm)1.5-2.0
Construction Speed(km/h)0-6

Welcome to leave a message


Recommend type
Back to top
Copyright © TATU Markings All rights reserved